Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter

You looking to find the "Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter" Good news! You can purchase Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $195.99 Too low to display   

Product Feature

• Complete brew kit
• All stainless construction
• Tri-ply bottom
• False bottom, spigot and spigot screen

Product Description

Bayou Classic pairs traditional form and professional quality with trendy innovation. This stainless 8-gallon Brew Kettle is designed for serious home brewers. It starts with a stainless steel 5 millimeter tri-ply 8 gallon brew kettle with side calibration marks measuring gallon and quarts. It also includes a stainless vented lid, a stainless ball valve, brew thermometer with 3 inch face 0-220 degrees, stainless false bottom that sets 3.25 Inch above the bottom of the pot and a tube shaped filter screen. The try-ply bottom promotes even heating and fights against scorching, while the all stainless construction has no interaction with worth or acid. The narrow diameter and high side walls reduce the chance of boil overs and the false bottom fits tightly on the low side indention to reduce particles and grain from entering the spigot chamber.

Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter Review

I picked up this kettle a few months back for roughly $180. This kettle is a weld-less setup (meaning the spigot and thermometer are not welded directly onto the kettle) and does require some careful construction to insure no leakage. Both the spigot and the thermometer come with two silicone o-rings for the inside and outside of the kettle. The key is to tighten the nuts enough that they are secure, but not too tight as this can actually cause some leaking. On the first brew day I had a few drips leak from the thermometer as I was heating up the water, but it stopped within 3 minutes.

The stainless-steel false bottom works very well for my setup, but if you are hoping to use it as a lauter tun, I would recommend attaching the bazooka screen at the same time in case any grain falls below it (there is a trick to this, there is a very specific angle the false bottom can be turned to to fit both in at the same time.

For reference, I have been using this for a Brew in the Bag setup in which this is my kettle for boiling the water, my mash tun, and my wort boiler. It can easily fit a 5 gallon batch with around 10-11 pounds of grain. If you are looking for higher gravity beers, I would recommend doing a 4.5 gallon or smaller batch or rinse sparging to add more water to the wort for a 5-gallon batch.

As a whole, I am thrilled with this kettle and it has become the center piece of my brew days.

The o-rings for the spigot were attached to a small piece of cardboard in my packaging. I originally thought they were missing, so be careful to look for them! It came with two extra o-rings, and I do recommend that you check the ones you are using for time to time and replace them if any leaking starts to occur.

Most of the consumer Reviews tell that the "Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Bayou Classic 800-408 Stainless False Bottom/Steam Tray for Bayou Classic Model 1032/1308/800-408, 11.8-Inch Diameter ...